รายละเอียด:
Skin/Hair Dryer Model GDC-600A (BitKid, Xinda) สินค้ารับประกัน 1 ปี (ตามการใช้งานปกติ)
1.Powerful and low noise ,easy to operate ,safe and reallable .Great choice for home ,hotel ,bathroom.
2.It can be used to dry hand ,body and hair,it has shaver socket(Devised with 220V-/50Hz and 110v-/60Hz jack) . The wind tube base is at the left side of the implement. Warm wind blows out automatically when the handle is taken up.
Wall Mounted Body dryer provides Body drying, skin drying, hair drying, hair stying function, and socket of 110 V fashinonable design and 220V and a power switch in one unit. It is proved as an idea choice for hotel and family for its scientific.
GDC-600A Body Dryer
User Manual
Components:
1 Cover
2 LCD Screen
3 Micro Switch
4 Base
5 Cross Screw
6 Hex Screw
7 Temperature Down Button
8 Air pipe
9 Temperature Up Button
10 Air Outlet Handle
Features:
1.5 heating levels
2.The temperature in the air outlet will not be changed by the ambient temperature, the temperature is at 60C when the handle is held up.
3.There are triple overheating protections
4.The output power will be automatically adjusted by the heat sensor to make this appliance more power saving than traditional hair dryer
5.There is timer of 18 minutes, which is displayed by;the LCD to show you the using time directly; the timer will stop this appliance after 18 minutes of consecutive working.
6.If this appliances works for 18 minutes, there is only cool air during the last minute to protect the air pipe.
Installation:
1.Drill 3 fixing holes that each of 6mm. with the attached template and fix the grommets attached into these holes.
2.Loosen the hex screw and cross screws with the hex screw key attached and cross screw driver to remove the cover.
3.Align the installation holes on its base to the holes drilled on the wall, and fix the appliance with the screws attached.
4.How to remove Air Pipe.
Use a flat screwdriver to insert onto the gap of air pipe and press down properly, and then turn the air pipe 15 degree round at left direction .
5. How to install the Air Pipe
Align the relative larger side of the air pipe connecting part to positioning block inside of body air outlet, then press the inclined ledge of air pipe forwardly, turn and tighten at right direction .
Application:
This appliance will be started when the power is switched on and its handle is held up. LCD will display its working status, time and temperature, The temperature in air outlet is set 60 C when the handle is held up, and can be adjusted within 40 C to 80 C by pressing the two buttons. On appliance cover. This appliance stop when its handle is hung up
Specification
Voltage: 220V~50Hz
Rate Power: 1000W
Rated Current: 4.5 A
Water splash proof: IPX4
Shockproof:
Note:
1.This appliance must be installed in the place out of bathing people’s reach.
2.Please not to use this appliance near the bathing basin or other bathing container.
3.Please avoid direct water injection on this appliance.
4.Please not the cover the air inlet and outlet.
5.When there is a malfunction, please switch off the power and contact with our company or the supplier near you or qualified electrician to repair.
6.Connectors on both ends of air pipe are permanently connected with air pipe when the appliance leaves our factory; please not to dismantle the connectors in order not to damage the component(s)
7.Please not to use rough cloth or chemical liquid such as thinner to clean its surface.
Accessories
One copy of user manual,
One installation template
A pack of 3 pieces each of 5x35 screws and 9 grommets
ดูรายละเอียดคุ่มือการใช้ BODY DRYER Model GDC-600A User Manual ได้ที่ Link "เว็บไซต์ที่เกี่ยวข้อง" ข้างล่างนี้